Minuteman SentryII UPS Manuel d'utilisateur

MINUTEMAN SentryII User’s Manual Version 2.0

- 10 - Step 4. The SentryII Data Logs and Event Logs are NOT removed during the uninstall process. They can be located in the SYS:InstallFol

- 11 - Step 4. The default web server port address is 80. Starting SentryII Services If, at the end of the installation, you selected to

- 12 -  IBM AIX 1. cd /usr/local/sbin 2. ./SentryII daemon  Red Hat Linux 1. cd /etc/rc.d/init.d 2. ./SentryII start  Tru-64 UNIX 1. cd/us

- 13 - CONFIGURATION After SentryII is connected, the default page will be displayed. To begin the configuration, select User located in the

- 14 - Server Settings The Server Settings page contains the configurable settings for the SentryII server. If your server requires values oth

- 15 - UPS Configuration The Configuration page contains configurable and static settings for the attached UPS. If changes are required, enter

- 16 - NOTE: Some fields may not be supported or displayed by all UPS’s. EVENT CONFIGURATION Event Action The event action page provides comple

- 17 - The following is a description of the fields contained on this page: • Event Displays the name of the event that is being config

- 18 - Followed by a 3 second pause. The numbers 8007597243 would be dialed. Followed by a 15 second pause. The numbers 123456 and # would be di

- 19 - • SNMP Trap Enabled Select the checkbox to enable sending a trap for this event. • IP Address The IP address of the computer that w

- 2 - Table of Contents INTRODUCTION ...

- 20 - The following is a description of the fields contained on this page: • Event Displays the name of the event that is being configur

- 21 - To set up shutdown for an event, select the Shutdown button. The following configuration page will be displayed. NOTE: The SentryII Remo

- 22 - To set up a system command for an event, select the Command button. The following configuration page will be displayed. The following

- 23 - MONITORING Meter The meter page displays current meter readings from the UPS. This allows you to view a quick snapshot of the status of

- 24 - Input The input page displays the current state of the input power to the UPS. Refer to the documentation provided with the UPS for more

- 25 - Alarm The alarm page displays the current state of the alarms supported by the UPS. View Graphic The view graphic page provides a curr

- 26 - If you would like to see other values, changing them is easy. To change a value or a meter, click on the title of the value or meter and

- 27 - UPS CONTROL OPTIONS Control The control page provides the interface for controlling various options provided by the UPS. You can control

- 28 - After selecting the New button or [Edit], the following page will be displayed. Select the desired shutdown and restart configuration an

- 29 - The following is a description of the fields contained on this page: • Logging Enable Select the checkbox to enable the logging o

- 3 - SYSTEM REQUIREMENTS...

- 30 - View Data Log The view data log page allows you to select a date range of UPS log records to view. Leaving the date fields blank will di

- 31 - View Event Log The view event log page allows you to select a date range of event log records to view. Leaving the date fields blank wil

- 32 - • Tru-64 UNIX 2. The SentryII Remote client MUST be on the same network as the server/workstation hosting the SentryII Server. 3. NO

- 33 - • Server Address The SentryII Server’s IP address. • Server Port The API port number of the SentryII Server. (See Server Settings o

- 34 - Step 2. Insert the SentryII Installation CD and select Install Software from the menu. If the autorun feature does not work, run setup.

- 35 - • On Battery Shutdown The amount of time in seconds, after the event occurs, before the Remote Client will be shutdown. If the event i

- 36 - Step 4. Specify the desired setting for the SentryII Remote client. NOTE: This splash screen is only available during the install pr

- 37 - Starting SentryII Services If, at the end of the installation, you selected to start SentryII, then SentryII should be running. If not

INTRODUCTION Sentry II is a UPS power monitoring application for the Windows 95/98/ME, Windows NT/2000/XP, SCO Unixware/Open Desktop, HP-UX, IBM AIX

- 5 - Step 1. Insert the SentryII Installation CD and select Install Software from the menu. If the autorun feature does not work, run setup.e

- 6 - 1. Start the Windows Services application. 2. From the Windows Start Menu, select the Settings menu, and then select the Control Panel m

- 7 - Step 4. The SentryII Data Logs and Event Logs are NOT removed during the uninstall process. They can be located in the C:\Program File

- 8 - Step 6. The default web server port address is 80. (NOTE: Novell Netware v 5.1 does have the ability to run a web server, you may want

- 9 - NOTE: To execute SentryII Server at system startup the support NLM files may be placed in the AUTOEXEC.NCF file. Connect to Service Step